*Actual product and finish may vary
SL00/T220 COMBO - Cal-Royal Entrance Leverset and Cylinder Deadbolt keyed alike (Packed Together).
SL Series (Non-clutch Mechanism), Optional Thru-bolt Installation for Commercial and Residential
standard Schlage "C" keyway other options available for additional cost.
SL00 Cal-Royal Pioneer Entrance/Office Heavy Duty Cylindrical Lever Lock Grade 2
Entrance/Office Lock - Turn/Push button locking. Pushing and turning button locks outside lever requiring use of key until button is manually unlocked. Pushing button locks outside lever until unlocked with key or inside lever is turned.
T220 Deadbolt Lock, Single Cylinder, Grade 3
Meets The Buy American Act
Hurricane Approved Hardware
Lifetime Warranty
SL00 Lever Lock
DOOR RANGES 1 ⅜” to 1 ¾” thickness doors
BACKSET 2 ¾” Standard, 2 ⅜” Optional
LATCHBOLT ½” Throw solid brass, reversible for RH or LH applications. UL Listed
LATCH FACEPLATE 2 ¼” x 1 ⅛”, adjustable for flat or beveled doors ⅛” in 2”, for 2 ¾” backset. Optional 2 ¼” x 1” for 2 ⅜” backset
STRIKES ASA strike standard, “T” and full lip stike available on request
EXPOSED TRIM Wrought Brass, Bronze or Stainless Steel, levers are Zinc casting, plated to match trim finish
ANSI STANDARDS Meets or exceeds requirements of BHMA/ANSI A156.2 Series 4000, Grade 2 (FF-H 106C), 400,000 cycles
T220 Deadbolt
DOOR RANGES 1 ⅜” to 1 ¾” thickness doors
BACKSET Adjustable 2 ⅜” or 2 ¾”
DEADBOLT FACEPLATE Latchbolt: Standard 2 ¼” X 1” packed with ⅛” plastic filler to convert 1” face plate to 1 ⅛” wide door preparations
TRIM Wrought Brass or Stainless Steel
BORE DIAMETER 1” for latch, 1 ½” or 2 ⅛” for lock housing
STRIKE 1 ⅛” X 2 ¾” Square Corner
DOOR RANGES 1 ⅜” to 1 ¾” thickness doors
BACKSET 2 ¾” Standard, 2 ⅜” Optional
LATCHBOLT ½” Throw solid brass, reversible for RH or LH applications. UL Listed
LATCH FACEPLATE 2 ¼” x 1 ⅛”, adjustable for flat or beveled doors ⅛” in 2”, for 2 ¾” backset. Optional 2 ¼” x 1” for 2 ⅜” backset
STRIKES ASA strike standard, “T” and full lip stike available on request
EXPOSED TRIM Wrought Brass, Bronze or Stainless Steel, levers are Zinc casting, plated to match trim finish
ANSI STANDARDS Meets or exceeds requirements of BHMA/ANSI A156.2 Series 4000, Grade 2 (FF-H 106C), 400,000 cycles
T220 Deadbolt
DOOR RANGES 1 ⅜” to 1 ¾” thickness doors
BACKSET Adjustable 2 ⅜” or 2 ¾”
DEADBOLT FACEPLATE Latchbolt: Standard 2 ¼” X 1” packed with ⅛” plastic filler to convert 1” face plate to 1 ⅛” wide door preparations
TRIM Wrought Brass or Stainless Steel
BORE DIAMETER 1” for latch, 1 ½” or 2 ⅛” for lock housing
STRIKE 1 ⅛” X 2 ¾” Square Corner
SL00-T220 Cal-Royal Lever Lock-Deadbolt Combo
- Brand: Cal-Royal
- Product Code: SL00-T220
-
$87.68