*Actual product and finish may vary

BEA 10PBS45 Push Plate, Stainless Steel 4.5" Square, Text Only. Pushing Plate activates a momentary cherry switch. Momentary switches may be normally open or normally closed (depending on users wiring choice). A normally open switch doesn't make contact until and unless it is held down. A normally closed switch is always making contact until the button is pushed.

This standard 4.5“ square push plate is the premium design for wall applications as it is functional, aesthetically appealing and weather resistant.

BEA introduces its new stainless steel push plate line. These push plates are designed to fit into standard electrical gang boxes, and/or BEA’s line of plastic enclosures. The faceplate is made of 1/16” thick stainless steel for durability, and has concealed fasteners to minimize vandalism. The push plates may be hard wired to the door operator or connected to BEA’s line of radio controlled transmitters.

Perfect for all application because they are easy to see, but unobtrusive to the aesthetics of the building.

Screws are on the outside of the plate, allowing for quick removal while still remaining functional and weather resistant.

A standard weather boot protects the cherry switch from harsh environments

Cherry Switch single-pole, 15 A, COM / NO / NC

Specifications:

16 gauge, 304 2B Stainless Steel Faceplate

1/8” thick, Aluminum Backplate

Stainless Steel 6-32 x 1” and 8-32 x 1” Allen head mounting screws

Cherry Switch: Single-pole, 15A, COM/ NO/ NC contacts

5/64” Allen key removes both 6-32 and 8-32 mounting screws

Wire nuts

Contacts: