Function: Replaces earlier 7510, 7810 electric strikes in either metal or wooden jambs for remote electrical control of any door equipped with an Adams Rite 4500, 4700, or 4900 Series (or similar) Deadlatch or cylindrical (key-in-knob/lever) type lockset with ½” to 5/8” latchbolt projection. Electrical actuation unlocks strike jaw, releasing latchbolt so door can be opened without operating latch itself. Extremely compact mechanism fits into jamb sections as shallow as 1-1/16”. Direct upgrade for Adams Rite 7110 Electric Strikes.

This non-handed strike features an ultra-compact design and an adjustable stainless steel split-jaw with over 2400 lbs. of holding force in fail-secure mode. The strike releases electrically with up to 35 lbs. of door “preload” (pressure exerted on doors by air conditioning systems, warping or misaligned hardware which can disable common electric strikes). Single solenoid operates on 12, 16, or 24 volt AC/DC power. Strikes are equipped with a quick connect plug-in type connector.

7400 Series Basic Differences:

7400 for Aluminum Jams or Stiles-1-1/4" x 4-7/8" flat faceplate

7410 hollow metal, wood and aluminum jambs-1-7/16” x 7-15/16” faceplate

7430 for Aluminum Jams or Stiles- 1-1/4”x 6-7/8” flat faceplate

7431 for Aluminum Jams or Stiles- 1-1/4”x 6-7/8” faceplate is radiused to match nose on inactive leaf in a pair of aluminum stile glass doors).

Fail-Safe/Fail-Secure: Field selectable at time of installation.

Case: Approximately 1” x 3-3/8” x 1-1/16” deep. Zinc aluminum alloy.

Strike Lip: Basic 7400 electric strike has lip of proper length for 1-3/4” thick door that closes flush with jamb edge. Where door thickness or jamb shape differs from this standard relationship, lip extension kits are available.

Strike Opening: 5/8” adjustable x 1-7/16” x ½” deep. Bolt retainer jaw is stainless steel. Strike accepts bolt of Adams Rite 4500, 4700, or 4900 Series Deadlatch or cylindrical latches.

Faceplate: Faceplate for 7410 measures 1-7/16” x 7-15/16”. For 7411 measures 10-1/4”. Available in a wide range of architectural finishes.

Voltage: Field selectable to match power source of 12, 16, or 24 VAC/VDC.

Current Draw/Amps:

Volts       AC Intermittent     DC Continuous

12                0.163                                 0.440

16                0.228                                 0.458*

24                0.084                                 0.230

*Requires 16 VDC adapter (P/N VA 7400-16VDC)

Options:

Monitoring – Two internally mounted switches (Form “C”) to indicate when the latchbolt is engaged in the strike jaws and a locked/unlocked solenoid status.

Power Sources – 4603 Rectifier, 4605/4606 Transformer, and PS-1 Power Supply.

Lip Extension Kits – Please see catalog for more information.

Modular Packaging – Consult factory or sales representative for details.

ELX-ElectroLynx™ Adapter – Connects Adams Rite electrified products to ElectroLynx system.

16 VDC Adapter – VA7400-16VDC required when using 16 VDC power.

Standard Package: Individually boxed with mounting screws, mounting tabs, adhesive shims to accommodate jamb or stile extrusion thickness greater or less than nominal 1/8”, and adjustable jaw shim pack and two plug-in voltage adapters for 12/16/24 VAC and 12/24 VDC.

 Related Products: When purchasing this product, please consider the following related products, available separately:

Power supplies and power transfer devices such as 4603 Rectifier, 4605/4606 Transformer, Piezo Horn audible indicator and PS-1 available separately.         

Deadlatches 4500 and 4900 Series Deadlatches available separately.

Note that 4700 Deadlatch is discontinued and replaced by 4900 Deadlatch.