The Securitron RLP-24 is a 24VDC, 10mA Relay Logic Pack that can be used as a DPDT latching alarm relay or for two door interlocks (mantrap).

The economical, multi-function RLP logic circuit can be used as a DPDT latching alarm relay, or provide a relay for two-door interlocks (mantrap), or can initiate a brief signal delay to eliminate timing problems among multiple monitoring points on a door under access control.

Relay Logic Pak with a pair of relays, pre-wired, for Senstat conversion to dry contact, alarm interface and/or interlock requirements. 2 Amp contacts. 3/4” x 1” x 2”.

PRODUCT FEATURES

• Provides additional relay to access control systems requiring N/O or N/C dry status signals

• Provides a brief delay to harmonize door state reporting from multiple detection points

• Can create a relay interlock circuit

• Use with locks to create an interlocked trap entry

• Provides DPDT relay with 1 Amp contacts

• Provides time delay of door operator when electric lock is used

Electrical Max Draw:

30mA at 12VDC or 15mA at 24 VDC Max

Operating Temperature:

-13 to +158F

[-25 to +70C]