Continuous hinges shall be full height piano-type hinge providing full height door support.

• Each knuckle 2", including nylon bearing at each separation for a quiet, smooth, self-lubricating operation

• All hinges shall be furnished with manufacturer’s recommended hardware pack per specific model application

• Must be able to carry Warnock Hersey Int. or UL for fire rated doors and frames up to 3 hours

• Hinges shall meet ANSI/BHMA Standard A 156.26 Grade 1

• Symmetrically templated hole pattern

This edge-mounted pin & barrel type hinge is used on many of today’s high traffic, high abuse doors. The hinge works well in locations that used anchor hinges, pivot reinforcement hinges or thrust pivot unit and hinge sets. This hinge saves on special door and frame preparation charges and makes the installer’s job easier. It can be used on both fire labeled and non-labeled openings.

Standard Features

Barrel Type Hinge - .187" diameter stainless steel pin (rod) Flanged nylon bearings.

Material - Heavy-duty 14 gauge stainless steel.

Standards - ANSI/BHMA Standard A156.26 Grade 1.

Mounting Hardware - Fasteners concealed when door is closed.  Universal screw pack provided.

Capacity - Supports weights up to 600lbs. 4'0" maximum door width.

Standard Sizes - 6'8", 7'0", 7'2", 8'0", 10'0".

Hole Pattern - Symmetrically template.

Handing - Not required for standard 7'0", 8'0" or 10'0". Handing required for 6'8" and 7'2" and for most optional features listed.

Fire Rating - 3 hours- hollow metal doors, 90 minutes- hollow metal and composite core wood fire doors, 20 minutes- wood doors. Classified in accordance with UL10C for positive pressure. Fire-rated label.

Option Features

Finishes - Scratch-Resistant Powder Coated Paint.

Fasteners - Tamper-proof security screws.

Other Features

Custom lengths- specify in inches

Custom hole pattern

Dutch door hinges- suffix “DDP”

Hospital tips - suffix “HT”

Raised barrel - suffix “RB”

Special sheared leaf

Electrical Modifications

Current Transfer Prep - suffix “CTP”

Adjustable monitoring switch - suffix “AMS”

Electrical Transfer Access Prep - suffix “ETAP”

ElectroLynx™

EL4 (4 wire), EL8 (8 wire), EL12 (12 wire)

Note: 10-Year Warranty on all Continuous Pin & Barrel Hinges 25-Year with Medical Bearings

Note: Fire label for doors and frames should be placed on the header and top rail of fire rated doors and frames