• 10LZR-i30 BEA Time of Flight Laser Sensor

*Actual product and finish may vary

10LZR-i30 BEA Time of Flight Laser Sensor for Industrial and Security Applications.


Features:

The LZR®–i30,works according to the principle of time of flight. It emits a light

impulse and measures the amount of time it takes to receive the impulse back. This

accurate technology enables the sensor to scan 4 planes in the front of the door, which

helps to significantly reduce hazards within the door threshold and surrounding area.

LZR-i30 - Time of Flight Laser Sensor for Industrial and Security Applications

Scans 4 plains of protection in front of your door

Can provide up to 30 ft High & 30 ft Wide coverage

3 visible laser beams during set up for precise coverage

Adjustable with the BEA Remote Control

33 ft of pre-wired Teflon cable (2 Relay Outputs)

Technology:  Time of Flight Laser

Mounting Height: up to 30 ft

Power: 12-35V DC

Technology: LASER scanner, time-of-flight measurement

Detection Mode: Presence (EN 12453 Typ. E)

Max. Detection Range: 30 ft × 30 ft

Remission Factor: > 2%

Emission Characteristics

IR LASER: Wavelength 905nm; maximum output pulse power 75W

Red Visible LASER: Wavelength 650nm; maximum output CW power 3mW

Supply Voltage 12 – 35 VDC @ Sensor Terminal

Peak Current at Power-On: 1.8 A (Max. 80 ms @ 35 V)

Power Consumption: < 5W

Response Time: Min 20ms; Max 80ms

Max. Switching Current: 2 electronic relays (galvanic isolated – polarity free)

Output: 80 mA (resistive)

Max. Switching Voltage: 35V DC / 24V AC

LED-Signal:          1 Blue LED: Status «Power–on»

                1 Orange LED: Status «Error»

                 2 Bi-colored LEDs: Status «Detection / Output»

Dimensions (W×L×H): 4.92 in× 3.66 in× 2.76 In (With Mounting Bracket + ½”) / Cable Length 30 ft

Material:PC/ASA

Color:Black

Rotation Angle on Bracket:  ± 5° (Lockable)

Tilt Angle on Bracket: ±3°

Degree of Protection: IP65 / NEMA 4

Temperature Range: -22ºF to +140ºF if powered

Humidity: 0–95% non-condensant

Vibrations: < 2G

Pollution on Front Screens: Max. 30%; Homogenous

Cut Target: < 11. 81 In × 7. 87 In × 27.56 In @ 23 ft (EN 12445 testbody A)

Norm Conformity:

2006/95/EC: LVD; 2002/95/EC : RoHS; EN 60825-1; EN 61000-6-1:

EMC-Commercial Level; EN 61000-6-2: EMC - Industrial level; 9.9 < 1999/5/EC :

R&TTE; 2004/108/EEC: EMC ; 2006/42/EC: MD EN 60950-1; EN 60529; IEC 60825;

EN ISO 13849-1Performance Level “c”, CAT 2; EN 12445; EN 12453 Typ E

LZR-i30 Installation Guide

LZR-i30 Product Video

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

10LZR-i30 BEA Time of Flight Laser Sensor

  • Brand: BEA
  • Product Code: 10LZR-i30
  • $1,402.25