*Actual product and finish may vary

Air Louvers VSL 8” x 18” Slimline Vision Lite bronze.

Low-profile beveled VISION LITE with continuous glass retainer. Recommended for applications where low profile, total visibility and light transmissions are required.

Order Size & Cut-Out Size 8” x 18”

Glass Order Size 7” x 17” x ¼” (Not included)

Low Profile Beveled Vision Lite for Fire-Rated Doors. Self-Attaching Frame has Single-sided Fasteners.

Specifications

Material: 20 gauge CRS frame. Minimum size 3" x 3”, maximum size 60” x 104”. See fire rating below.

Construction: 1-1/4” trim with radius corners, mitered and welded. Continuous glass retainer, countersunk mounting holes in the bevel on non-corridor side.

Door: 1-3/4” door. For other sizes see VLFIG and VLFEZIG.

Fasteners: #8 x 1" flathead phillips SMS to match finish.

Glass: 3/16”- 1/4” glazing to be ordered separately from glazing section. Use fire rated glazing with Warnock Hersey (WHI) or UL classification markings for fire rated applications. Visible light is 2” under rough opening size. Glass size is 1” under order size.

Fire-Rated Air Louvers Glazing to fit this Product: WS, UL, KFRF, PPF, PYRO

Fire-Rating, Testing & Listings: When installed in properly rated and approved door, ratings up to 3 hours can be achieved, depending on the glazing used. See glazing ratings for maximum exposed area. Tested and Listed for UL 10C and Criteria of UBC 7-2 Positive Pressure.