*Cylinder Not Included - Mortise Cylinder w/ Straight Cam for inside operation, Rim Cylinder for outside operation.

Cylinder Option Available:

-Mortise cylinder with straight cam for Inside Key Control.

-Rim cylinder optional for Outside Key Control.

Options Examples:

-Can select mortise cylinder for normal use.

-Can select rim cylinder if would like to disarm it from the outside as well as having the mortise cylinder inside.

If selecting both the mortise and rim, they can be keyed alike for a cost of $2.00.

If selecting multiple alarms with mortise cylinders they can be keyed alike for $2.00 each.

If selecting multiple alarms with mortise and rim cylinders they can be keyed alike for $2.00 each.

Typical applications include emergency fire escape doors, nursing home stairwell doors, rear restaurant and theater doors.

The PG21 is designed to continually monitor the status of a door. When opened, the protected door triggers an alarm sounder, an optional strobe or can activate another device via a Form-C relay.  It has various programmable features including:

• Four Siren Sounds

• Four "Alarm Modes" for a variety of applications 

• Programmable Time Delays - Entry Delay Time Options – include 15 seconds, 1 minute 15 seconds & 3 minutes 15 seconds

• Battery Operated (Battery life approximately 2 ½ years)

• External Power Supply Capability

• Built-in Door Bell (Requires button installation)

• Cover Tamper Protection (Unauthorized removal trips alarm)

• "Key Lock Tamper" (Cover cannot be removed without key)

• Accepts standard mortise cylinders

• Multiple Door Monitoring (External Reed Switch Contacts)

• Form-C Relay (Connect to fire/burglary panel or other device)

• Annunciator Feature (Beeps when door opens)

• Two Operating Modes: "Always Armed" and "On/Off"

• Strobe Feature (PG21MSS models only)

• Status Indicator

Battery-operated surface-mounted door alarms.  Alarms magnetically activated.  Cylinder not included.

The PG21 unit is usually mounted on the interior of the door frame or door and is paired with a magnet (Magnetic Actuator) mounted on the opposing side of the door gap. Opening the door when armed will activate the alarm. The PG21 is shipped from the factory in "Always Armed" mode (if key is removed, unit automatically re-arms) and can be converted to a manual "On/Off" mode (allowing the operator to manually arm or disarm with the key). The Status indicator (located on the front of the Housing Cover) signifies whether the unit is armed or disarmed (red indicates armed status). A selectable annunciator feature beeps to signal the opening of the door while the unit is disarmed.

Specifications:

Dimensions: 11" x 2½" x 2 3/8" (22.8cm x 6.3cm x 6.8cm) (LxWxD) (Length 11" with Strobe, 9" without Strobe).

Finish: Metallic Silver 

Power Requirements: 9-Volt Alkaline Battery (supplied).  The PG21 may also be used with Model PP100 (optional) or other power supply providing 9-12Vdc at 300mA. Internal battery may be used simultaneously with external power supply.

Sounding Device: Piezo electronic sounder sweep siren, steady or pulsing, 110dB at 10 feet

Shipping Weight: 1 lb, 10 oz.

Relay Contacts: (Form-C) rated at 24VAC/DC at 1A (non-inductive).