Features

-Operates with a unique rolling code each time the switch is activated

-Multiple applications (i.e. Vestibule) with Delay or No Delay programming

-100 transmitters can be programmed into a single receiver

-Removal of a single transmitter code

-Up to 4 separate wireless Receivers can be activated by a single Transmitter (i.e. 4-Button)

-Red LED indicator on Transmitter confirms transmission and battery life

-3-Volt or 9-Volt Battery Power

433 MHz Extended Hold (EH) version: The transmitters used in conjunction with an Extended Hold (EH) receiver, once depressed and held, are designed to hold the door open until the transmitter button is released. Once released the 'EH' receiver will begin its no delay or predetermined delay time countdown sequence and allow the
door to close.

Specifications

-Frequency: 433 MHz

-Emitted Radio Power: -28.7 dBm (TX)

-Power Consumption: 3mA (TX) 30mA (RX)

-Input Voltage: 12 to 24 VAC/DC (RX)

-Contact Rating:

1.0 A @ 30 VDC

0.5 A @ 125 VAC

0.3 A @ 60 VDC

-Operating Temperature: 14ºF TO 131ºF (-10ºC TO 55ºC)

-Max No. of Programmed Units Per Receiver: 100 TRANSMITTERS

-LEDs Receiver Learn: RED

-Relay Activation: BLUE

-Dimensions:

Transmitter – 2-3/4” X 1-3/8” X 9/16” (70mm x 35mm x 14mm)

Receiver – 2-3/4” x 2-1/8” x 1” (70mm x 55mm x 25mm)

Certifications: FCC, IC, CE

A unique rolling code is transmitted each time the transmitter is activated (thus providing a secure signal). Since receivers can be individually programmed, multiple receivers can be programmed differently thus allowing for sequencing in multiple applications. Those receivers programmed with NO DELAY will activate immediately upon receiving the transmitter signal. Those receivers programmed with a DELAY will activate at the end of their pre-determined time delay set by the potentiometer. The use of multiple receivers will allow for the uninterrupted pace or hands free operations through a pair of doors upon initial activation.