Sargent 84 series
SARGENT manufactures a full line of exit devices providing the best combination of simplicity, strength, durability, aesthetics and innovation and are perfect for applications such as commercial office buildings, medical and educational institutions.

Features
Concealed rods for security and aesthetics
UL Panic listed only
Specify NB- for less bottom rod
NB- Devices allows free access for wheelchairs and carts. No bottom strike eliminates tripping potential
All functions determined by outside trim
Devices are ANSI A156.3-2008 Grade 1
Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
Specifications
Door types: Hollow or extruded aluminum doors (for doors over 1-3/4" to 2-1/4" thick, specify thickness and order as 31-option. 1-3/4" (44mm) minimum stile width required. Stile must be hollow with inside dimension of at least 1-3/8" (35mm) square)
Rail sizes: Available in 4 sizes and door width determines the size needed. E Rail- for 24" to 32" door widths; F Rail- for 33" to 36" door widths; J Rail for 37" to 42" door width; G Rail-for 43" to 48" door width
Strike: 640 strike for Top and Bottom
Dogging feature: Hex key dogging standard; cylinder dogging available (16-)
Electric options: AL-alarm BT-Beacon PL-SARGuide photoluminescent coated TL-SARGuide illuminated Touchpad 53-LX latchbolt monitor 54-Outside lever monitoring 55-Request-to-exit signal-rail monitoring 56-ELR remote latch retraction 57-Delay egress and electromagnets 58-Electric dogging 59-Electroguard:self contained delayed egress (NB-excluded)
Mounting Fasteners: Supplied standard with machine screws
Top Bolt: Stainless steel
Device centerline from finished floor: 41" (1041mm) for standard applications 38" (969mm) for elementary schools and to meet local accessibility standards when a 100 series auxiliary control is used
Door opening/height: Must be specified -120" (3048mm) Max Door opening
Center Case Dimensions: 8-3/8" (213mm) x 2-5/8" (67mm)
Projection: Pushbar neutral- 3" (76mm) Pushbar depressed- 2-1/8" (54mm)
Fire Exit hardware: Not available
Options
Cylinder Dogging Kits
Electric Latch Retraction
Signal Switch in Rail
AL-Retrofit Kits
Available Trim Options
710 ETL
713 ETL
715 ETL
106
113
826
Freewheeling Trim
740 ETL
743 ETL
746 ETL