The 7KC Medium Duty Cylindrical Lock Offers Simple, Safe and Dependable Protection. Best 7KC grade 2 lever locksets are used in Commercial Buildings , Best Access Systems 7KC Medium Duty lockests are available in many finishes and functions to meet your requirements.

Features:

Versatile trims & finishes available.

Cylindrical chassis to fit common door preparation.

Through-bolt mounting studs increase torque resistance.

No exposed keeper hole on keyed units for increased security.

Hub torque spring provides extra resistance to lever sag.

Snap-on inside rose (no exposed mounting screws).

Internal steel mechanisms are corrosion treated for normal atmospheric conditions.

Options and Accessories Available from Factory See:

Function: ANSI # F109 Entrance, Latch Operated by: Rotating the inside lever, Rotating the outside lever only when the inside push button is out, Turning the key in the outside lever.

Outside Lever Locked by: Pushing the inside button, Always unlocked Pushing and turning the inside button. Turning the button keeps the outside lever locked until the button is turned back

Outside Lever Unlocked by: Turning the key in the outside lever, (only when the button is not turned) Rotating the inside lever, (only when the button is not turned). Closing the door (only when the button is not turned)

Inside Lever Cannot be locked

Inside Lever Always unlocked

Description:

Finishes Options:  605 3 bright brass, 612 10 satin bronze, 613 10B oxidized satin bronze, oil rubbed, 626 26D satin chromium plated

Lever Options:  14– curved return 15– contour angle return 16– curved no return - Handle is approximately 4 3/4 long (from center-line of chassis).

Rose  "D" 3 1/2" diameter Convex

Backset: 2 3/4" standard

Latch: 1/2" throw deadlocking latch. Front: 2 1/4" x 1 1/8" x 5/32" standard for 2 3/4"backset.

Strike:  S3: Conforms to ANSI A115.2 for 1 3/4 doors (4 7/8 x 1 1/4 with curved lip).

Projection on door: Approx. 2 3/4 when mounted on 1 3/4 door.

Keyed: SFIC(less core)

Handing: Lockset reversible for either hand of door without removing keyed lever.

Lever Handles - Lever handles are a high-quality zinc alloy. Trim components are brass or bronze. Body is approximately 5/8in diameter;  #14 and #15 levers conform to California Administrative Code Title 19 and Title 24. All three styles of levers conform to the Illinois Accessibility Standard.

Mounting:  2 1/8" diameter bore for lock housing, 1" diameter for latch tube.

Certifications:

ADA–Americans With Disabilities Act: 7KC series – The design and operation of the BEST® cylindrical lock meets the intent of the standard for ANSI A117.1 section 404.2.6 and Illinois Accessibility Standard 400.310 (j)(8).

Underwriters Laboratories® : 7KC series – Listed by Underwriters Laboratories for use on 3 Hr, A label for single (4’ x 8’) doors.

Builders Hardware Manufacturers Association: 7KC series – Listed by BHMA for A156.2, Series 4000, Grade 2.

ADA–Americans With Disabilities Act: 7KC series – The design and operation of the BEST® cylindrical lock meets the intent of the standard for ANSI A117.1 section 404.2.6 and Illinois Accessibility Standard 400.310 (j)(8).

California State Fire Marshal: 7KC - series 14 & 15 lever conforms with California Title 24