*Actual product and finish may vary

B101S Q Falcon Cylindrical Passage Lever Lock Grade 2 ANSI F75-2 - Latch-set - Latch bolt by levers at all times.


When you need a tough, reliable lock for a government/military, retail, industrial or multi-family project, you need a Falcon B-Series lock. Our full line of Grade 2 locksets are a perfect replacement for existing locks, or a smart spec in new construction. With upgraded finishes these locks deliver style as well as strength. Falcon B-Series locks feature an interchangeable core that can be removed for quick, easy re-keying, and are compatible with SFIC products from other manufacturers. Most important, they’re backed by one of the best names in the business.

Lock Features

Door Thickness: 1-3/8” to 2” standard.

Backset: 2-3/4” standard. 2-3/8” also available.

Mechanism: Parts constructed of brass or cold formed steel, zinc plated and dichromated for rust resistance. Springs are stainless steel.

Attachment: Lock chassis secured to door by two screws which pass through a steel rose insert inside and thread directly into the outer rose mounting assembly.

Handing: Locks are non-handed.

Cylinders: Drilled with 6-pin chambers, pinned in 5. Pinning in 6 chambers available when specified, at no cost. Cylinder assemblies removable to rekey. Also available with 6 or 7-pin interchangeable core cylinders. Cylinder housings and plugs machined from solid brass. Springs are phosphor bronze. Two

nickel silver keys furnished standard.

Competitor Cylinders: The B Series accepts these standard 6-pin cylinders: Assa, Kaba, Lori, Medeco, Primus and Schlage.

Keyways: “G” keyway standard on standard cylinders. “A” keyway standard on I/C core cylinders. Also available with some optional keyways. See page 9.

Trim: Roses are 3-1/2” diameter, heavy wrought brass or bronze, installed over steel rose inserts which are through-bolted through door. Levers are pressure cast zinc (solid levers-no inserts) material finished to match mating parts. Latches: 1/2” bolt projection. UL (3-hour, A Label) listed. Latches have self-adjusting fronts to accommodate beveled or flat doors.  2-3/8” backset with 2-1/4” x 1” latchfaces, 2-3/4” backset with 2-1/4” x 1-1/8” latchfaces. Deadlocking latches have a solid round bar stock DL bar preventing latch jamming and/or lock outs.

Strikes: 4-7/8” x 1-1/4” ANSI strike with curved lip to meet ANSI A115.2 door frame preparation standard. Consult Options and Accessories section for other available strike size and configurations.

Screws: Furnished with combination screws for use in wood or

metal doors and frames.

ANSI/BHMA: Exceeds ANSI/BHMA A156.2, Series 4000, Grade 2.

UL: 3-hour, A Label

 

Falcon lock B series specifications

Key-in-lever cylindrical locksets shall be Falcon B Series or equal and meet the following requirements:

• All locks shall meet the new ANSI/BHMA A156.2, Series 4000, Grade 2 test requirements for key-in-lever locksets.

• Locksets shall be UL Listed 3-hour, A Label.

• Lever trim shall have individual heavy-duty springs for lever return and to prevent lever sag. Trim shall be through-bolted with screws coated with thread sealant to provide strength and

resistance to loosening.

• Roses shall be 3-1/2” diameter.

• All lever designs shall be solid (no inserts) and meet the federal ADA and state disability requirements.

• Locksets shall adjust to fit door thickness from 1-3/8” to 2”.

• All locksets shall be non-handed and not require field disassembly for re-handing.

• Preparation for door must be non-handed.

Acceptable manufacturer: FALCON LOCK

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

B101S Q Falcon Cylindrical Passage Lever Lock ANSI F75-2

  • Brand: Falcon
  • Product Code: B101S Q
  • $87.75


Available Options