The QL Series is a robust Grade 1 lockset featuring a Freewheeling Lever for abuse resistance, two screw lockset install for quick installation and a 10 year Mechanical Warranty. The perfect solution for replacing or upgrading locksets in commercial applications.

Features

Freewheeling Lever: Sierra-SR

Finish:US26D Standard (US3,US10B available from factory)

Door Preparation- Requires standard  2-1/8” (53.45mm) bore through door.

Backset-2-3/4” (69.85mm)

Door Thickness: 1-3/8" (34.92mm) to 1-3/4” (44.45mm) doors standard

Latch: Stainless Steel with 1/2" (12.7mm) throw standard, UL Listed, guarded latchbolt on all locking functions.

Latch Front: 1-1/8” x  2-1/4 for 2-3/4” (69.85mm) backset.

Warranty: Ten Year Warranty

Handing: Non-handed

Exposed Trim: QL Levers are pressure cast zinc measuring 4-3/4" (120.65mm) in length.

QL Roses are wrought brass 3-11/32" (84.8mm) diameter. Total projection from face of door is 2 17/32" ( 4.5mm).

Packaging: 6 per case

Strike: 306, ANSI 115.2, 4-7/8" (123.82mm) x1-1/4(31.75mm) curved lip strike standard.

Cylinder: KD, CS keyway

Keys: 2 keys provided with each cylinder

Certification & Compliance:

•Arrow QL Series Cylindrical Lever Locks are BHMA Grade 1 Certified, ANSI/BHMAA 156.2, Series4000

•All Arrow QL Series Locks are U.L. and C.U.L. listed for use on 3 hour, A label or lesser doors

•Meets American with Disabilities Act Requirements

ADA/Americans with Disabilities Act: Acceptable Door Hardware: Section 4.13.9 Handles, pulls, latches and other operating devices on accessible doors shall have a shape that is easy to grasp with one hand and does not require grasping, tight pinching or twisting of the wrist to operate. Lever operated mechanisms, push-type mechanisms and “U” shaped handles are acceptable designs.