*Actual product and finish may vary

28-10G70 Sargent Electromechanical Lever Lock- 24V Fail Safe Grade 1 - 24v Fail Safe- 28-10G70: Power off, unlocks outside lever.  10G71: Power off, locks outside lever.  Deadlocking latch.  Key retracts latch.  Inside lever always allows egress.  Voltage requirements: 12VDC or 24VDC. Regulated; always specify voltage  250mA at 24VDC or 500mA at 12VDC.  Provided with ElectroLynxR 8-Pin Connector.

Limited Stock On Hand-Being Replaced By 10X Line(replaced by 10XG70)

The SARGENT 10 Line is a heavy duty cylindrical key-in-lever handle lockset exceeds by five times the ANSI 156.2 Series 4000 Grade 1 standards. At over 4 million cycles, the 10 Line beats the competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry. The 10 line trim is designed to conform to national and state fire and handicapped requirements.

Specifications:
For Doors -  1-3/4" (44mm) thick door adjusts to 2" (51mm) standard 1-3/8" (35mm) thick door, 1- Option for Adapter plates
Backsets - 2-3/4" (70mm) backset w/ 1-1/8" front (standard) 2-3/8" (60mm) backset w/ 1" wide front (specify 20-) 3-3/4" (95mm) backset w/ 1-1/8" front (specify 23-) 5" (127mm) backset w/ 1-1/8" Front (specify 25-)
Cylindrical Housing - Steel, zinc dichromate finish
Front - Wrought brass, bronze and stainless steel 2-1/4" (57mm) x 1-1/8" (29mm) Fixed Bevel 2-1/4" (57mm) x 1" (25mm) (included with 20-)
Strike - Wrought brass, bronze and stainless steel 800 curved lip strike – standard 808 curved lip ANSI strike (28- option) Wrought box strike available (WBS- option)
Handing -  All 10 Line Locks are non-handed except for the G & Y Levers
Roses - Heavy wrought brass and bronze
Latch - Stainless steel 1/2" (13mm) throw Brass 3/4" (19mm) throw for pairs of doors (41- option)
Cylinder - Brass, 6 pin, LA keyway standard
Keys - Two, nickel silver
Door Prep - 161
Minimum Stile - 4-1/2" (114mm)
Strength, Durability and Security:
Cycle Test: Exceeds 5 times A156.2 Grade 1 requirements.
Abusive Locked Lever Torque- without entry gained: Exceeds 1.5 times A156.2 Grade 1 requirements.
7 YEAR LIMITED WARRANTY - no service required to maintain warranty.

Design:
Solid feel and precise lever action
Slim rose design available
Decorative Levers — Coastal Series designs – Gulfport and Yarmouth
Levers are solid one piece cast construction, except “J” lever

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

28-10G70 Sargent electromechanical lever lock 12/24V fail safe

  • Brand: Sargent
  • Product Code: 28-10G70
  • $732.27


Available Options