The DC6000 Series door closer is the solution. A variety of features makes this the choice for retrofitting, quick installation, and longevity. Corbin Russwin offers a wide variety of arms, tracks and special brackets to meet special header/ frame conditions. The small footprint and unobtrusive cover are additional advantages to a versatile line of closers.

Options
DC6210 A1, DC6210 A4, DC6210 A5

Features

Spring Power

DC6200 closers: multi-sized; fully adjustable sizes 1 through 6.  DC6400 closers: sizes 1 through 6; half-size adjustability.  

Handing

Non-handed.

Body

Cast-iron case with seamless cold headed steel spring tube.

Arm

Standard: heavy-duty forged steel.  

Spindle

Cold headed heat-treated steel.

Piston

Precision machined, heat-treated steel.

Springs

Chrome silicon wire.

Valves

Latching speed valve standard.  Closing speed valve standard.  Multiple backcheck location valve and backcheck intensity valve standard.  Delayed action valve optional. Delayed action preset for 20 seconds. Between 90° and 70° for all mountings. To order specify M71.

Seals

“O” rings.

Fluid

Standard: high lubricity extreme temperature hydraulic fluid.

Degree of Opening

Up to full 180° opening standard for regular, top jamb and parallel arm mountings, conditions permitting.

Power Adjustment Arm Bracket

15% adjustment standard.

Cover

Standard: non-metallic full cover.  Optional: slim cover; Discontinued.  Optional: full metal cover; specify M73 x hand.

Mountings

Standard: regular and top jamb.  Optional mountings available.

Mounting Bracket

QUIK-INSTALL™ mounting bracket standard.

Fasteners

Standard: self drilling screws.  Optional: sex nuts and bolts (SNBs); specify M54.

Corrosion Protection

Painted protective coating on all metal surfaces for use in corrosive environments. To order specify M75.

Security Package

Includes heavy-duty parallel or regular arm, full metal cover and security Torx® machine screws. Specify M87 x arm x hand.

Warranty

Ten-year limited warranty. Refer to Corbin Russwin price book for details.

Certification/Compliance

Barrier-Free Code Compliance

The DC6000 Series Door Closers listed below conform to the 5 lbs. maximum door opening force requirement for non-fire-rated interior hinged doors, according to:

Americans with Disabilities Act (ADA)

Complies with the Accessibility Guidelines for Buildings and Facilities, Section 4.13.11

ANSI

Meets A156.4, Grade 1.  Meets A117.1. DC6200 DC6412 DC6210 DC6421 DC6220 DC6401 DC6411  These door closers are certified by Corbin Russwin Architectural Hardware to comply with the above standards when properly installed and (if applicable) adjusted, in regular arm, parallel arm and top jamb mountings.  UL / ULC / UL10c Listed for fire and cycle requirements.