*Actual product and finish may vary

CAG03 Cal-Royal Pioneer Cylindrical Lever Lock with Clutch Heavy Duty Grade 2
Classroom Lock - Deadlocking latch bolt operated by lever from either side except when outside lever is locked from outside by key. When outside lever is locked, latch bolt is operated by turning inside lever.

CLUTCH - Free turning handle in the lock position without retracting the latch, to deter breaking of handle.

Meets The Buy American Act
Hurricane Approved Hardware
Lifetime Warranty

GENERAL SPECIFICATIONS - Full length 4-3/4" lever handle. Key removable outside lever for fast rekeying. Non-handed levers. Concealed mounting screws.
DOOR RANGES - 1 3/8" to 1 3/4" thickness.
BACKSET - 2 3/4" Standard, 2 3/8", 3 3/4" and 5" optional.
Rose Diameter: 3-1/2"
HOUSING -Cold Rolled Steel and Zinc Dichromate finish for rust resistance with precision cast steel retractor. 2 1/8" diameter bore.
STRIKES -ASA 1 1/4" x 4 7/8" standard. Other strikes available upon request.
EXPOSED TRIM - Wrought brass, bronze or stainless steel, levers are Zinc casting, plated to match trim finish.

CYLINDER & KEYWAYS -Schlage C keyway is standard. 6 pin solid brass . Call us for other keyways such as Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59/60, Corbin-Russwin L4, Sargent LA-LB-LC, Falcon E, Arrow A, Yale 8, Yale GA. All Cylinders are 6 pin. Finish 26D & US3

ANSI STANDARDS - Meets or exceeds requirements of BHMA/ANSI A156.2 Series 4000, Grade 2 (FF-H 106C), 400,000 cycles.
LATCH OPTIONS - 2 3/4" standard, brass with 1/2" throw. 2 3/8", 3 3/4" and 5" backset optional. GND750 dead latch reversible for flat and beveled door. 3/4" throw anti-friction dead latch for pair of fire doors.
LATCH FACEPLATE -2 1/4" x 1 1/8" adjustable for flat or beveled doors 1/8" in 2", for 2 3/4" backset. Optional 2 1/4" x 1" for 2 3/8" backset.