Description:
BEA’s Matrix 1 provides vehicle detection via a single or dual loop. It may be used for entry, safety and exit loop detection.

The Matrix 1 is able to detect vehicle presence with pulse on entry and pulse on exit. It has two output relays and a US wiring configuration. Different power supply options available, including 110 to 120VAC and 12 to 24 VAC/DC. This loop detector features fail safe open, fail safe closed and automatic boost sensitivity. The unit has the ability to fine-tune both presence detection time and inductive sensitivity via two easy-to-use potentiometer adjustments. The Matrix 1 is a dual loop, dual input detector, which allows independent detection of Loop A and Loop B. This is advantageous in vehicle directionality and sequencing applications.

Features and Benefits:
UL Listed
Available in operating powers of 110 to 120 VAC and 12 to 24VAC/DC
Two output relays
Convenient US wiring configuration
Automatic boost sensitivity
Fail safe open and fail safe closed
Ideal for vehicle directionality and sequencing applications
Settings are adjusted via two easy-to-use potentiometers
Pulse on entry and pulse on exit presence detection
Wiring: US wiring configuration
Connector: 11 pin male (86CP11)
Detection Modes: Presence, pulse on entry, pulse on exit
Detect Frequency Adjustments: 8 settings, variable settings from 20 KHz to 130 KHz
Inductive Range: 20 - 1,000 mHenry
Setup Time (after power up/configuration): Approx. 8 s, 2 sec/channel
Relay: Dual Relay
Maximum Contact Voltage: 5 amps @ 230 VAC
Pulse Time Output: 100 ms to 500 ms
Sensitivity (ΔL/L): 0.005% to 0.5%
Temperature: -22ºF - 158ºF

 Features: Failsafe open, failsafe closed, automatic boost sensitivity, learn mode upon power up.
Display: Power LED, 2x Detect LED (single, dual)
Norm Conformance: IP40, CE Listed, UL Listed and ANSI 156 compliant

Weight: 7 oz
Dimensions: 1.5 in x 3 in x 3 in