The 3000 Series is a full size 1500 lbs. holding force electromagnet. It is designed for life safety and high security on rated or nonrated doors and frames. Specify for commercial, industrial, or institutional openings where maximum security and durability is required.

All 3000 Series locks are designed for ease of installation with DynaLock’s exclusive FasTrak mounting system, field selectable voltage, and convenient wiring compartments. Optional integrated door and lock status sensors allow remote monitoring without the need to install separate “door contacts”.

The 3000 Series is offered in single, double, and split armature models for both outswinging and inswinging doors. The coil and housing assembly mounts rigidly to the door frame while the armature mounts to the door in a manner that allows it to pivot slightly to compensate for door irregularities. When the door is closed and the lock is energized the armature is magnetically bonded to the lock face, thus securing the door without utilizing any moving parts.

High Security:  12/24 VDC/VAC - One Piece Housing - FasTrak Mounting - Lifetime Warranty

Dimensions:  DxHxL  1 ½” X2 ¾” X 11”

Input Voltage:   12 or 24 VDC/VAC (Field Selectable)

Current Draw:   0.42A @ 12V Each Coil     0.21A @ 24V Each Coil

Contact Ratings:    DSM - 0.25A @ 24VDC/VAC

 DYN - 1A @ 24VDC/VAC

 ATS - 0.5A @ 24VDC/VAC

Coil Resistance:    53.2 Ohms (+/- 10%) Wht/Wht, Blk/Blk

Options:

DSM - DOOR STATUS SWITCH - Signals door closed or ajar. SPDT contacts.

DSM2 - DOOR STATUS SWITCH - For the 3002 models.

HSM  - HIGH SECURITY MONITOR - Includes the following:

1.DOOR STATUS SWITCH - Signals door closed or ajar. SPDT contacts.

2.DYNASTAT FORCE SENSOR - Indicates efficient magnetic   bond.SPDT contacts

HSM2 - HIGH SECURITY MONITOR - For the 3002 models.

VOP - VALUE OPTION PACKAGE - Includes the following:

1.DOOR STATUSSWITCH - Signals door closed or ajar. SPDTcontacts.

2.DYNASTAT FORCE SENSOR - Indicates efficient magnetic bond. SPDT contacts.

3.ANTI-TAMPER SWITCH - Signals removal of the housing cover. SPDT contacts.

4.RELOCK TIME DELAY - Adjustable 1-80 seconds.

VOP2 - VALUE OPTION PACKAGE - For the 3002 models.

LCB - BASIC LOCK LESS CIRCUIT BOARD - Coil and housing with flying leads.

LED - BI-COLOR LED - For local signaling of lock status. (Requires HSM or VOP option)

LED2 - BI-COLOR LED’S(2) - For the 3002 models.(Requires HSM2 or VOP2 option)

LP - LOW POWER COIL - 12V only @ 0.16 Amps (Single Lock)

LP2 - LOW POWER COILS - 12V only @ 0.32 Amps (Double Lock)

Standard Finish: US28 Satin Aluminum.

Notes: DSM, HSM, VOP and LED options not available on 3001 split armature models or with LCB option.