Single Pole Double Throw (SPDT) type C switches, rated 2A at 24VDC
RX- option - Request-to-Exit or Enter Signaling Switch
Two switches mounted internally in lockbody that provide independent monitoring of inside and outside lever rotation
Available in all functions with non rigid levers
Not available for the following options: 1-, 3P, 74
Not available for the following trims: LS or FE
Electrical Requirements for solenoid functions:
Voltage: 12VDC or 24VDC Regulated. Full wave rectification installed inside the lockbody.
Current: .25A at 24VDC or .5A at 12VDC
Operating Temp.: Max. 151°F (66°C), Min –31°F (-35°C)
UL and CUL listed for use on Fire Doors

Note: Repeated operation at voltage exceeding +/- 10% is not recommended.
Warning:
Do not connect locks to a circuit sharing an additional electromagnetic device as the lock may be damaged
Transient voltage must be suppressed at the source or before connecting with the lock
Varistor rated at 35 volts (peak) may be used for transient voltage protection
Note: Opening the lockbody or the solenoid replacement in the field by non-authorized personnel voids UL label and lock warranty.

The Strongest Lock on the Block
When it comes to strength and durability, SARGENT continues to set standards with the 8200 Mortise lock. The 8200 far surpasses ANSI/BHMA A156.13 Series 1000 Grade 1 standards, making it the strongest and most durable mortise lock in the industry. SARGENT Mortise Locks are designed and constructed with high quality components to provide maximum security, performance and durability.

Download Sargent 8200 line catalog

Use For:
Hospitals
Schools / Universities
Office Buildings
Government Facilities

Maxiumum Flexibility

Aesthetic design. Many escutcheon and lever styles available to match a wide range of styles
Available with push/pull trim, perfect for hospital applications

Strength & Security

Far Exceeds ANSI/BHMA A156.13 Series 1000 Grade 1 and Security Grade 1. Meets various higher security detention standards such as ASTM impact for latchbolt (Level 1) and deadbolt (Level 3) compoments
Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard
 Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life
Latchbolt is stainless steel with 3/4" projection one piece anti-friction reversibile latch
Through-bolted lever trim for increased security
Torx® and spanner screws
Security key systems available (Signature, Keso, KesoF1, and XC)

Certification Compliance

ANSI/BHMA certified
Meets A117.1 Accessibility Code
UL and UL listed to Canadian safety standards Note: Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and Sargent Manufacturing Company makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority Having Jurisdiction) to ensure compliance with all applicable codes and ratings.
Meets positive pressure requirements UL 10C and UBC 7-2 (1997)
California State Reference Code

Multi-Functionality

Complete line of lockbodies offering 58 functions, 4 electrical functions
9 functions accomplished with one lockbody
Functions easily changed without opening the lockcase
Versatile. Offered for door thickness ranging from 1-3/5" (35mm) to 6" (152mm)

Easy to Install
Easy operation. Only 30º of lever rotation required to retract latchbolt
Lever springs contained inside of the lock case
Pre-assembled components make installation fool-proof Installation time — reduced by up to 40%

Lock is easily re-handed without removing parts or opening case