In perimeter protection systems that involve the central control of electric locking devices, an on-site emergency release may be required. The “break glass” concept may be preferred over the pull station, because it is less vulnerable to misuse or tamper actuation.

The 740 Series Emergency Break Glass units consist of a replacement Break glass cartridge, that normally holds the plunger-activated switch depressed until the cartridge lens is broken. When the lens is broken the plunger moves forward and alters the switch contact position. Four replacement lens disks are provided with each assembly. The small hammer is attached to the Break Glass Assembly via a mounting clip along with a 12” chain, to insure it will not detach from the assembly.

Features and Benefits

• Surface mount in a standard 3-gang enclosure

• Compatible with all Fail Safe type electronic locking systems

• An effective alternative to the standard pull box

• Stainless steel standard finish

• Models with LED or audible alarm

• Clearly marked signage indicating purpose of the Release

740 Specifications - Contact Box from “Z” switch

Contact Rating -  6A @ 120 VAC Normally Open (NO) Normally Closed (NC) contacts with color-coded leads

LED - 12/24 VDC

Horn - 3-18 mA

Input - 6-28 VDC

Decibles - 80 dB @ 2ft.

Options

740 – Includes break glass switch assembly and hammer mounted to a silk-screened 3-gang stainless switch plate

741 – Includes an attached indicator light with red lens

742 – Includes a Sonalert horn for 6-24 VDC operation attached to the plate