This unique, versatile, "all-in-one", fire rated electric strike combines strength, (1500 lbs holding force) convenience, (everything you need is in the box) and in an attractive, sleek easy to install design.

The "Saw-tooth Adjustment Locator" design allows the installer to move the deadbolt keeper, or plug and deadlatch ramp vertically to align with a wide variety of mortise locks with offset latches. There's no need to order special faceplates, you can adjust the strike to work with any mortise lock. Everything you need is in the box, including a faceplate for centreline latch entry. Our unique shim design adjusts vertically on the keeper to align with any latch location to give you up to 1/8" horizontal adjustment. We also include a trim plate for messy frame cuts, a hands-free adhesive template and all the drivers you need to install the strike.

Features

Heavy-duty stainless steel construction with 32D finish (Brushed stainless steel)

Up to 1500lbs (680kg) holding force

Fits frame cutout for HES 1006 (1003)

Accommodates ¾" latch projection

Centerline faceplate included for centerline latch entry

Horizontal adjustability up to 1/8" (3mm) for misaligned frames

Vertical Adjustability for precise deadbolt and latchbolt alignment

Adjustable deadbolt keeper and deadlatch ramp

Accommodates up to 1" deadbolt (Night-latch function only, bolt will not release)

Field selectable voltage input - Accommodates 12 or 24VDC and 12 to 24VAC

Anti-tamper security screws

All installation drivers included

Low current draw (0.19 Amps @24VDC)

"Cool Keeper" Solenoid located in house prevents keeper from heating up

Plug-in wire connector

Trim plate included

Adhesive paper template included

Non-handed

Fail-locked (fail secure) mode standard

Optional Latch Monitor kit

Note: Fail-unlocked (fail-safe) strikes are not permitted on fire labeled doors.

Selectable Voltages

Voltage                  Duty                      Sound       Amps                     Ohms

12 VDC                Continuous            Silent      .375 Amps             37 Ohms

24 VDC                 Continuous           Silent      .190 Amps             148 Ohms

12-24 VAC            Intermittent            Buzz       .280 - .565 Amps     37 Ohms

Intermittent Duty = Energized less than 1 min. with Duty Ratio 1:5

Continuous Duty = Energized 1 min. or more

* Ratings are based on maximum current draw at +10°C and include initial power-up current draw.

† Nominal resistance at +25°C ± 7% tolerance

The fail secure locking mechanism shall only be installed where allowed by the local authority having jurisdiction and shall not impair the operation of the panic hardware or intended operation of the emergency exit.

WARRANTY

5 Year Limited Warranty

Certification

UL 1034 Burglary Resistant Listed

UL 10C (3 Hour) Fire Rated