• ECGN0524SEC Cal-Royal Electrified Lever Lock 24V Fail Secure

*Actual product and finish may vary

ECGN0524SEC Cal-Royal Electric Lever Lock 24V Fail Secure with Clutch Grade1 Storeroom

Electrified - 24Volt - Fail Secure

Storeroom Lock - Deadlocking latch bolt operated by key in outside lever or by rotating inside lever. Outside lever is always fixed.

Meets The Buy American Act
Lifetime Warranty
Hurricane Approved Hardware

Features:
UL Listed
Continuous duty solenoids for cooler operation during “continuously ON” applications
Standard plug-in rectifier allows for an AC/DC power source
Low current draw
3 year “No Hassle” warranty

Options:
Voltage requirement - 12V (AC/DC) or 24V (AC/DC)
Amperage – 250mA @ 12V or 150mA @ 24V
Solenoid coil resistance - 12V = 49 Ω or 24V = 159 Ω
Power consumption - 3 watts
Function – available “Fail Safe” (FS) or “Fail Secure” (FSE)

GENERAL SPECIFICATIONS - Full length 4-3/4" lever handle with 3/8" return on GN and SPA Design. Rose diameter 3-1/2". Key removable outside lever for fast rekeying. Non-handed levers. Concealed mounting screws.

CLUTCH - Free turning handle in the lock position without retracting the latch, to deter breaking of handle.

APPLICATIONS - For offices, schools, hospitals, apartments, hotel/motel, residential, commercial and public buildings.

DOOR RANGES - 1 3/8" to 1 3/4" thickness. 2" to 2 1/4" thickness also available on request.

HOUSING -Cold Rolled Steel and Zinc Dichromate finish for rust resistance with precision cast steel retractor. 2 1/8" diameter bore.

STRIKES -ASA 1 1/4" x 4 7/8" standard. Other strikes available upon request.

TRIM - Thru-bolted assembly through door with separate spring cage for each lever.

CYLINDER & KEYWAYS - 6 pin solid brass "C" keyway standard. Schlage E, Schlage C-K, Russwin D1-2-3-4, Corbin 59/60, Corbin-Russwin L4, Sargent LA-LB-LC, Falcon E, Arrow A, Yale 8, Yale GA .  All Cylinders are 6 pin. Finish 26D & US3

ANSI STANDARDS - Meets or exceeds BHMA/ANSI A 156.2 Series 4000, grade 1 requirements. Exceeds 800,000 cycles.

LATCH OPTIONS - 2 3/4" standard, brass with 1/2" throw. 2 3/8", 3 3/4" and 5" backset optional. GND750 deadlatch reversible for flat and beveled door. 3/4" throw anti-friction deadlatch for pair of fire doors.

LATCH FACEPLATE - Standard 2 1/4" x 1 1/8" for 2 3/4" backset. Optional 2 1/4" x 1" for 2 3/8" backset.

 

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

ECGN0524SEC Cal-Royal Electrified Lever Lock 24V Fail Secure

  • $283.42


Available Options