*Actual product and finish may vary

Folger Adam 310-4-30 Electric Strike for both leaves of a pair of doors when spacing of the vertical rods is between 2 5/8" and 3 3/8" - Pk keeper standard

Folger Adam 310-4-30 industrial grade electric strikes used on a paor of doors (without mullion) which are equipped with SURFACE Vertical-Rod Exit Devices having a swinging, pullman style latchbolt.

For Surface Vertical Rod Exit Devices only

Specifications

UL1034, burglary-resistant listed
ANSI/BHMA A156.31, Grade 1
DOD approved
New York City accepted

Electrical

.51 Amps @ 12VDC continuous duty
.25 Amps @ 24VDC continuous duty

Standard Features

Tamper resistant, heavy-duty construction
Constructed entirely of stainless steel for strength and corrosion resistance
Static strength 1,500 lbs.
Dynamic strength 70 ft-lbs.
Endurance 500,000 cycles
Adjustable keeper to allow for door and frame misalignment
Pullman keeper
Non-handed
Fail Secure (standard)
Plug-in connector
Five year limited warranty

Optional Features

Fail Safe
LCBMA - Latchbolt & Locking Cam Monitor with Auxiliary Switch

Note: Double-door models are available with 4 different center-to center dimensions between latchbolt keepers. Keepers are wide enough to compensate for vertical-rod exit bolts which may be as much as 3/8" off center-to-center dimension, either way.

When using an electric strike in conjunction with a vertical-rod device, it is necessary that:

The bottom rod of the exit device be removed or made inoperative
The latchbolt of the exit device be the "Pullman" or beveled type
The latchbolt be free-latching and remain projected while the door is open. Mechanisms that hold the latchbolt retracted while the door is open, and automatically release it when the door is closed, must be removed or made inoperative