Applications:    Heavy duty commercial

Certifications: • BHMA Certified ANSI A156.3

                          • UL/cUL Listed for up to 3 hours for “A” label doors up to 10’ (3048 mm) in height

                          • UL10C/UBC 7-2 (1997) Positive Pressure Rated

                          • UL10B Neutral Pressure Rated

                          • UL305 Listed for Panic Hardware

                          • ANSI A250.13 Severe Windstorm Resistant Component

                          • Complies with ANSI 117.1 for accessible buildings and facilities

                          • Hex dogging feature standard on non-fire labeled doors

Trim: Withnell Lever with escutcheon ( Available from factory only Archer, August)

                          • Pull plate trim

                          • Rim cylinder x optional pull

Covers: Stainless steel, Zinc

Chassis: Aluminum

End Caps: Zinc

Door Width: • 36” (914 mm) field sizeable to 30” (762 mm) door (Exceptions: ELR, ED, DE minimum is 36”)

 Door Height: • 7’ (2134 mm) - Standard

                         • 8’ (2438 mm) – Optional from factory only

                         • 10’ (3048 mm) – Optional from factory only

Door Thickness: 1-3/4” (44 mm) - Standard

Projection:  • 3” (76 mm) in undogged position

                      • 2-5/8” (67 mm) in dogged position

Stile Width: • 5-3/8” (137 mm) - Minimum stile width required for single door and 5/8” (16 mm) stop

                      • 4-7/8” (124 mm) - Minimum stile width required for double doors

                      • 4-7/8” (124 mm) - Minimum stile width required for double door x Rim Device with double door strike

                      • All stile widths are measured from door edge

Fasteners: • Wood and machine screws

                    • Thru-bolts

Latchbolt: • Top - 1/2” (13 mm) throw, pullman type with automatic dead-latching, stainless steel

                   • Bottom - 1/2” (13 mm) throw, pullman type, held retracted during door swing, stainless steel

Rod Length: • Rods for 7’ (2134 mm) door - Standard

                       • Rods for 8’ (2438 mm) door – Optional from factory only

                       • Rods for 10’ (3048 mm) door – Optional from factory only

                       • Door height of 6’ 8” (2032 mm) requires 29-1/4” (743 mm) top rod length

                       • Door height of 7’ (2134 mm) requires 33-1/4” (845 mm) top rod length

                       • Door height of 8’ (2438 mm) requires 45-1/4” (1149 mm) top rod length

                       • Extension rods available, 2’ (610 mm) or 3’ (914 mm) for doors over 7’ (2134 mm)

Strikes:  • Stainless steel with plated rollers - Included standard with panic devices

               • Solid stainless steel - Included standard with fire rated devices

               • 10’ (3048 mm) fire rated device requires strike and hook kit, 4912, for top strike

               • Surface applied to frame with slotted holes for easy adjustment

               • Double door strike for use with surface vertical rod and rim device available

Finishes: US32D (US3, US4, US10, US10B, US26, US26D factory order only)

Notes: • Cylinder dogging available on non-fire rated devices, specify CD

              • 3902 1-1/8” (29 mm) mortise cylinder sold separately

               • Recommended to be used on appropriately reinforced doors