Certifications: • BHMA Certified ANSI A156.3

                          • UL/cUL Listed for up to 3 hours for “A” label doors

                          • UL10C/UBC 7-2 (1997) Positive Pressure Rated

                          • UL10B Neutral Pressure Rated

                          • UL305 Listed for panic hardware

                          • ANSI A250.13 Severe Windstorm Resistant Component (requires use of windstorm reinforcing bracket, 2-649-0154, on Rim device)

                         • Complies with ANSI 117.1 for accessible buildings and facilities

                         • Hex dogging feature standard on non-fire labeled doors

Trim: • Withnell Lever with escutcheon (Archer, August Available by factory order only)

           • Pull plate trim

           • Rim cylinder x optional pull

Covers: Stainless steel, zinc

Chassis: Aluminum

End Caps: Zinc

Door Width:  • 36” (914 mm) field sizeable to 30” (762 mm) door (Exceptions: ELR, ED, DE minimum is 36”)

                        • 48” (1219 mm) field sizeable to 36” (914 mm) door (factory order only)

Door Thickness: 1-3/4” (44 mm) - Standard

Projection: • 3” (76 mm) in undogged position

                     • 2-5/8” (67 mm) in dogged position

Stile Width: • 5-3/8” (137 mm) - Minimum stile width required for single door and 5/8” (16 mm) stop

                      • 4-7/8” (124 mm) - Minimum stile width required for double door x surface vertical rod with double door strike.

                      • 5-3/4” (146 mm) - Minimum stile width required for double doors with 2” (51 mm) mullion

                      • All stile widths are measured from door edge

Fasteners: • Wood and machine screws

                    • Thru-bolts

Latchbolt: 3/4” (19 mm) throw,  pullman type with automatic dead-latching, stainless steel

Strikes: • Stainless steel with plated rollers - Included standard with panic devices

              • Solid stainless steel - Included standard with fire rated devices

              • Surface applied to frame with slotted holes for easy adjustment

              • Double door strike for use with surface vertical rod and rim device available

Finishes: • US26D, US32D, (US3, US4, US10, US10B, US26 Available by factory order only)

Notes:  • Cylinder dogging available on non-fire rated devices, specify CD

              • 3902 1-1/8” (29 mm) mortise cylinder sold separately

              • Recommended to be used on appropriately reinforced doors