*Actual product and finish may vary

10PBS BEA Push Plate, Stainless Steel 4.75" Square, Text Only. Pushing Plate activates a momentary cherry switch. Momentary switches may be normally open or normally closed (depending on users wiring choice). A normally open switch doesn't make contact until and unless it is held down. A normally closed switch is always making contact until the button is pushed.

This standard 4.75“ square push plate is the premium design for wall applications as it is functional, aesthetically appealing and weather resistant.

BEA introduces its new stainless steel push plate line. These push plates are designed to fit into standard electrical gang boxes, and/or BEA’s line of plastic enclosures. The faceplate is made of 1/16” thick stainless steel for durability, and has concealed fasteners to minimize vandalism. The push plates may be hard wired to the door operator or connected to BEA’s line of radio controlled transmitters.

- Perfect for all application because they are easy to see, but unobtrusive to the aesthetics of the building.
- Screws are on the outside of the plate, allowing for quick removal while still remaining functional and weather resistant.
- Optional weather boot between plate and back plate for all weather applications. Sold separately.

Cherry Switch:
single-pole, 15 A, COM / NO / NC
Contact:
-N/O - Normally Open
-N/C - Normally Closed
-C - Common

Contact Current Rating:
15 Amps

Technical Specifications:
-16 gauge, 304 2B Stainless Steel Faceplate
-1/8” thick, Aluminum Backplate
-Stainless Steel 6-32 x 1” and 8-32 x 1” Allen head mounting screws
-Cherry Switch: Single-pole, 15A, COM/ NO/ NC contacts
-5/64” Allen key removes both 6-32 and 8-32 mounting screws
-Powdercoat then clear coated faceplates available on certain styles
-Wire nuts