The new bayonet mounting feature makes installs easier, allowing the installer to have their hands free during the mounting process. There is no need to consider door handing as all the M400 Series electromagnetic locks are both non-handed and symmetrical, allowing optimum placement of the magnet no matter the application.
All M400 Series locks have automatic voltage sensing for 12 and 24 volts along with polarity protection to make wiring less complex.
The M490 is tested and certified to meet or exceed UL1034 and BHMA 1500lb. hold force requirements.
The M490 electromagnetic lock comes in two configurations to meet your specific security needs. The M490 provides basic security, while the M490P provides intelligent sensing and reporting features needed to integrate with access control systems. Additional options are available for the M490P. Kits are available for top jam, double door, and glass door applications.
1,500 lbs. holding force
12/24 VDC Automatic Voltage Selection – 1.30 A @ 12VDC, .70A @ 24VDC
Complete accessory mounting hardware available
Features
Bayonet mount makes installation simpler by not requiring magnet to be held overhead while mounting screws are installed
New design allows for RH/LH configuration in the field
Armature mount allows armature to pivot compensating for slight opening imperfections
Limited Lifetime Warranty
UL1034 and BHMA Grade1 certified
1500 lb. Hold Force
ADDITIONAL FEATURES
M490/M492
Automatic Voltage Selection (AVS) senses the voltage applied to the lock and responds accordingly
M490P/M492P
Magnetic Bond Sensor (MBS) monitors the strength of the bond between the lock and armature so you know the door is secure
Door Position Switch (DPS) monitors whether the door is open or closed
Relock Time Delay (RTD) provides a relock delay that is adjustable from 0.5 to 30 seconds
Optional
Anti-Tamper Switch (ATS); Provides an indication that the cover of the magnet is securely fastened to the lock and that the on board circuitry is secure.
OPTIONS (for all)
Herculite Door Bracket
Top Jamb (inswinging doors)
Specifications
Holding Force meets or exceeds BHMA standard of 1500 lbs.
Input Voltage (Standard Unit) 12/24 VDC
Current Draw (Amps Standard Unit) 1.3A @ 12 VDC .7A @ 12 VDC
Automatic Dual Voltage 12/24 VDC
Height 3"
Length 25-1/16"
Width 1-3/4"
Weight (approximate) 28 lbs.
Certifications UL 294, UL10C, ANSI/BHMA A156.23
Temperature 0º-49º C (32º-120º F)
Wire Gauge 14-22 AWG