• 8801FL CRCN Yale Mortise Passage Lever Lock Grade 1

*Actual product and finish may vary

CRCN8801FL Yale Mortise Passage Lever Lock Grade 1 - ANSI F01.  For doors that do not require locking.  Latchbolt retracted by knob/lever either side at all times.


With quick lever handing and a quick reversible latchbolt, lockset handing takes only seconds. Add a standard non handed curved lip strike, and you have a no-hassle mortise lock that’s quick and easy to install.

When it comes to strength, the Yale® 8800 series brings a new measure of security to the door. Its 1" throw stainless steel deadbolt extends further back into the reinforced steel case when in the locked position, providing added stability and resistance to abuse. Solid trim packages also provide deterrence to vandalism, making the 8800 series a prime player in your total opening security package.

10-year mechanical warranty.

Suitable for installation on doors 1-3/4" to 3-1/4"

Features

A.D.A.

The 8800FL meets accessibility guidelines of the Americans with Disabilities Act and the requirements of the Uniform Federal Accessibility standards and ANSI 117.1, all requiring ease of accessibility for the handicapped.

ANSI/BHMA

Certified ANSI/BHMA A156.13, Series 1000, Operational Grade 1 (8800FL with CN escutcheon & SL8800 meet Security Grade 1).

Bevel Front

Yale 8800 series fronts are free floating to adjust from flat to the standard bevel of 1/8" in 2".

Door Thickness

8800 series mortise locks are supplied as standard for 1-3/4" thick doors. For other than standard, specify the door thickness on the order: (i.e. 2", 2-1/4", etc.)

Installations

8800 series mortise locks conform to ANSI/BHMA Specifications A156.115 which cover hardware preparations for steel doors and steel frames and A156.115-W which cover hardware preparations for wood doors with wood or steel frames.

Knurled Designs

Where required by the local authority, trim can be knurled to be identifiable to the touch for blind persons. All knob designs except CA may be ordered knurled; all lever designs except designer trim and Reflections® trim may be ordered knurled.

Only the outside knob or lever will be knurled or abrasive coated unless specified otherwise. To order a complete lockset knurled or abrasive coated, suffix the lockset model number with “Knurled” or “Abrasive Coated,” i.e. LF x CN8807 x “Knurled,” LF x CN8817-2 x “Knurled Inside Only,” AU x CN8828FL “Abrasive Coated.”

Lead Shielding

All Yale 8800 series mortise locks are available with a lead shield for installation in lead-lined doors. To order, suffix the lockset model number with “lead-lined.”

Quick Reversibility

Yale mortise locks with the same trim on both sides (knob x knob or lever x lever) are field reversible. These locks can be converted to accommodate the hand of the door. However, to reduce installation costs, it is recommended that the hand of the door be specified for each lockset ordered. If the hand of the door is not specified, RH will be furnished.

Underwriters Laboratories

(UL - cUL)Yale 8800 series mortise locks have been listed by Underwriters Laboratories Inc. for use on fire doors having a rating up to and including 3 hours and for use on 20 minute wood doors. This pertains to single swing doors not exceeding 4 feet in width and 8 feet in height and in doors mounted in pairs not exceeding 8 feet in either direction (unless otherwise noted in the individual listings.)

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

8801FL CRCN Yale Mortise Passage Lever Lock Grade 1

  • Brand: Yale
  • Product Code: CRCN8801FL
  • $424.95


Available Options