Optional Specifications:

Non-labeled devices to have cylinder dogging. Mortise cylinder included. Specify CD. 

All surface/concealed vertical rod devices to have pullman type bottom latch bolt. Specify PB. 

All surface/concealed vertical rod devices to have extended top rod up to 10'. Specify ETR. 

All surface/concealed vertical rod devices to be furnished less bottom rod. Specify LB. 

Devices to have electric latch bolt retraction to provide remote access from the secure side of door. Can also be used in conjunction with low energy/automatic door operator. Specify ES.  (ES must be powered by PS-501 power supply and use ES-105 power transfer). 

Devices to have a latch monitor to report the latch bolt status. Specify LM. 

Devices to be furnished with two switches in the touchbar to provide notification when touchbar is depressed. Specify MS. 

Devices to have latch monitor with monitor switches in touchbar. Specify LM/MS. 

Devices to have latch monitor with monitor switches and a bypass to permit authorized exit. Specify LM/MS BP.

Devices to have one of the following exit alarm options: battery-powered exit alarm (BPA), battery-powered exit alarm with a 4-minute reset (BPAR), or direct hard-wired exit alarm (DWA).

Devices to use a vision lite shim kit to raise the device from the door surface to accommodate glass light molding. Specify GK9000 (medium stile) or GK9200 (narrow stile).

All devices for labeled wood or composite doors to be furnished with sex bolts. Specify SNB.

All concealed vertical rod devices installed in aluminum doors to be furnished with appropriate brackets for aluminum door applications. Specify ALD (9100) or NS (9600).

All devices to use tamper-resistant security screws. Specify TX.

All devices to be furnished with rigid trim. Specify R after trim.

All devices to be furnished with clutch-style lever trim. Specify C after lever trim.

Certification:

• Certified/listed to ANSI/BHMA 156.3, Grade 1 for exit devices.

• U.L. and C.U.L. listed under their continuing reinspection programs and conforms to standards U.L. 10C and U.B.C. 7-2 positive pressure testing.

• Complies with NFPA 101 life safety code. Fire rated devices comply with NFPA 80 fire doors and windows.

• Devices, trim, pulls, and levers comply with the Americans for Disabilities Act, 1994, and ANSI 117.1-2003 for accessible and usable buildings and facilities.

• Contributes to U.S. Green Building Council, LEED MR Credits 2.1, 4.1, 4.2 and 5.1.

• Listed with the California Department of Forestry and Fire Protection, Office of the State Fire Marshal (medium stile devices only).

• Hurricane code approved to Miami-Dade County Florida acceptance No. 06-912.05 (medium stile devices only).

• Florida State Building Code listed (medium stile devices only).