Surface mounted magnet mounts under header and surface mounted armature assembly mounts into door just under magnet assembly. Air gap adjustment is from top of door by allen wrench.

The Locknetics by Schlage GF3000SM DSM MBS(Door Status Monitor/Door Monitoring Sensor) shear lock features a patented design offering advances over any shear lock on the market.

A microprocessor-based control module provides advanced electronic features. This circuitry automatically senses and adjusts input voltage, allowing for operation from 12 to 24 volt DC power sources.

This surface shear lock offers maximum versatility in application. The GF3000SM model provides a low profile, surface mount lock for outswinging doors. The GF3000TJ model provides a low profile, surface mount lock for inswinging doors. It provides a unique mounting solution with no brackets needed, which are standard with direct pull magnets. The GF3000SM and TJ models feature a black anodized housing with the choice of modular finish plates.

Features and Benefits

• Automatic voltage selection 12/24 VDC (Filtered)

• 3000 lbs. of holding force

• Requires filtered, regulated power supply (PS900 Series)

• Built-in Automatic Relock Switch

• Adjustable time delay on relock, 0-30 seconds

• Low temperature operation

• Microprocessor controlled

• Optional Magnetic Bond Sensor (MBS) to monitor the secure/not secure condition of the lock

• Optional Door Status Monitor (DSM) to sense the open/closed position of the door

• UL 10C Positive Pressure Fire Tests of Door Assemblies, cUL, CSFM and MEA listed to use on fire labeled openings

• Meet ANSI/BHMA A156.23 standards

Specifications

Holding Force - 3000 lbs

Current Draw - 0.90 Amp @ 12 VDC 0.45 Amp @ 24VDC

Weight - 7 lbs

Lock Body: Length x Height x Depth - 9-1/2” x 1-1/2” x 1-1/2”

w/Mounting Tabs: Length x Height x Depth - 11-9/16” x 1-1/2” x 1-1/2”

Armature: Length x Height x Depth - 8-3/8” x 1-3/8” x 1/2”

Armature Bracket: Length x Height x Depth - 10-5/8” x 1-3/8” x 1”

Certifications - UL 10C Positive Pressure Fire Tests of Door Assemblies ANSI/BHMA A156.23 1500 lbs

Model

GF3000 Adjustable from top edge of door.

GF3000TJ Top Jamb Unit (inswinging doors) Magnet mounts on inside top jamb. Adjustable from top edge of armature.

GF3000TRD Mounting assembly which provides armature adjustable from the latch edge of the door.  Recommended with zero clearance condition between top of door and ceiling.

GF3000BRD Mounting assembly to mortise armature into bottom rail of door. Magnet is installed in floor/threshold. Provides solution when no top rail is available.

Options

DSM/MBS Door Status Monitor/Magnetic Bond Sensor (Standard on GF3000SM DSM MBS)