*Actual product and finish may vary

Description: The 4560 Deadlatch Handle will easily unlock the 4300, 4500 and 4900 Series Deadlatches. 4560 Lever
These handles fit solidly into the cylinder hole of the latch.

Handed

Handle

Lever of satin chrome plated zinc alloy is shaped to fit the hand, with a concave thumb-rest portion that tends to keep knuckles and thumb safely away from the jamb, even on a short backset narrow stile.

Function

Designed to operate 4300, 4500 and 4900 Series Deadlatches by a natural downward hand movement, these handles incorporate an activator cam disc that mounts on the handles escutcheon and fits solidly into the cylinder hole of the latch. Not intended for use as a door pull.

Escutcheons

All three handles shown here use the same 1-3/8“ x 4” escutcheon. It is designed to match the narrow stile door’s clean lines. A 1/4” square heat-treated spindle is part of escutcheon assembly, which interlocks with the cam plug.

Cam Plugs

Secured in latch body by cylinder setscrew, plug is also rigidly tied to handle escutcheon by hardened steel pins. Handing can be reversed by removing a spring clip, “flopping” the cam and replacing the clip.

Options

Pre-handing can be specified LH or RH although re-handing in the field is easily accomplished. The three standard handles shown are for 1-3/4“ thick doors. Available on special order for doors up to 3-1/4” at extra cost.