• MS+1890 Adams Rite MS Hookbolt/Latch w/Flat Faceplate

*Actual product and finish may vary

Adams Rite MS 1890 Hookbolt Maximum Security Deadbolt/Latch w/Flat Faceplate is for use on aluminum stile doors.

Less strike

Less cylinders and keys: excepts 1" length, 1-5/32" diameter mortise cylinder with MS cam.

Faceplate: Flat

1" x 6-7/8" faceplate

ANSI/BHMA Type E82101 (Grade 1)

MS+1890 Series

Cylinder Backset

Available in 31/32“, 1-1/8” or 1-1/2”.

Case

Steel with corrosion-resistant plating. 1“ x 7-3/8” x depth.  (Depth varies by backset)

Latchbolt

5/8" x 5/8" with 7/16” throw. Zinc alloy with Delrin face for smooth, quiet action. Handing easily reversible. Bolt can be held fully retracted to allow door to be free swinging.

Function

Deadbolt Maximum Security after hours plus traffic control convenience for management during the business day. Typical installation is a bank or store requiring three modes of door control: 1. Both lock and latch bolts retracted for unrestricted entry and exit during business hours, 2. Handle-operated latch for exit-only traffic just after closing, and 3. Maximum Security hookbolt for overnight lockup. NOTE: Handle or paddle operates latchbolt only.

Lock Bolt

5/8" x 1-3/8" with 13/16” throw. Eight ply laminated stainless steel. Center ply has Alumina-Ceramic core to defeat any hacksaw attack, including rod-type “super” hacksaws. Hook shape repels prybar attempts.

Armored Strike

Satin stainless steel trim plate with steel mounting plate and dust box. Flat strike furnished. Also available for pairs of doors in radius shape, or flat with square corners for ANSI hollow metal jambs. Flat strikes also available with longer lip. (MS+1890 Deadbolt/Latch cannot be used with electric strikes.)

Operation

360° turn of key or thumbturn throws or retracts the hook shaped deadbolt. 120° further turn retracts latch bolt as well.  Cylinder may be any make standard 1-5/32“diameter mortise type with MS ® cam. Handle retracts spring-loaded latchbolt only.

Cylinder Cam

MS+1890 Series locks are operable by any standard 1-5/32“ diameter mortise cylinder with special MS® dimensioned cam. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See catalog for cylinder make and trim ring information.

Options

Order handle/paddle for one side only or both sides.  Handles/paddles on both sides solve, with minimum traffic impediment, the problem of doors that stand ajar due to wind.

Standard Package

Individually boxed with strike and machine screws for mounting. Cylinders available separately at extra cost. Shipping weight: 2 lbs.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

MS+1890 Adams Rite MS Hookbolt/Latch w/Flat Faceplate

  • $171.00


Available Options



4066 Adams Rite Mortise Thumbturn

4066 Adams Rite Mortise Thumbturn

Adams Rite 4066 Mortise Thumbturn for use on Adams Rite swinging door hardware. ANSI/BHMA Type E1921..

$28.93

4560 Adams Rite Deadlatch Handle

4560 Adams Rite Deadlatch Handle

Description: The 4560 Deadlatch Handle will easily unlock the 4300, 4500 and 4900 Series Deadlatches..

$45.77

4036 Adams Rite Mortise Cylinder

4036 Adams Rite Mortise Cylinder

Adams Rite 4036 Mortise Cylinder for use on Adams Rite swinging door hardware. Standard 1" long. ANS..

$28.93