• 7500M Norton Door Closer Metal Cover Tri-Pak Regular Arm

*Actual product and finish may vary

Norton 7500M w/Metal Cover grade 1 surface mounted multi-size x tri-pak regular arm door closer.

Metal Cover (cover Is handed for top jamb applications)

Series 7500M Multi-Sized Door Closer w/Metal Cover.

Adjustable through the entire power range of door closer sizes 1 through 6, as outlined in ANSI/BHMA standard A156.4. The series 7500 also conforms to the minimum opening force requirements of the Americans with Disabilities Act (A.D.A.) and ANSI/BHMA standard A117.1 for interior doors.

Specify door width for all UNI closers.  33” to 41” and 42” to 48” available from stock.  Includes sex nuts.

Finishes:  605, 606, 612, 613, 626

Aluminum Alloy Housing

Closer bodies are constructed of a special aluminum alloy, carefully selected to accommodate interactive steel components and operating conditions.

Rack & Pinion Operation

Provides a smooth constant control of the door through its full opening and closing cycle. 180° door swing can be achieved when door, frame, hardware and arm function do not interfere.

Non-handed

With few exceptions all series 7500 and 7700 door closers are non-handed and can be installed on either right or left hand swing doors. Pinion shaft extends vertically through the closer body in both directions. Some options, as noted on pages 6-8, will require that the hand of the closer be specified.

Sweep Speed Control Valve

Allows adjustment of door speed from the door's full open position down to approximately 10° from the closed position.

Latch Speed Control Value

Allows adjustment of door speed from approximately 10° down to the door’s fully closed position.

Tri-Style® Packing

7500 comes with screws, brackets and soffit plates to allow for regular, top jamb, and parallel arm installations.

Adjustable Backcheck Cushion Valve

Provides control of the door in the opening cycle, beginning at approximately 75° of door opening. It slows/cushions the door opening, when the door is forcibly opened beyond its pre-adjusted limits.

Adjustable Backcheck Position Valve

Allows the door opening position, where backcheck cushioning begins, to be adjusted to a greater door angle, up to a maximum of 20° farther (approximately 95°).

Standard 7500 Molded Cover

7500 Molded of high-impact U.L. listed material and covers the entire closer body assembly.  This cover is non-handed for all applications.

7500M Metal Cover (cover Is handed for top jamb applications)

Warranty

25-year limited warranty

Spring Force Indicator

This visual indicator enables the installer to quickly set and verify the spring size on the closer, eliminating the guesswork of setting the spring force.  Standard on all 7500 Series door closers.

Closer Fluid

NorGlide® closer fluid is a specially formulated multi-viscosity hydraulic fluid that contains lubricity and anti-oxidation agents that provide optimum performance and efficiency. This fluid complements the interaction of the door closer's aluminum housing with its steel and brass components, while maintaining stable viscosity to allow the door closer to perform in temperatures ranging from extremely high to as low as -40° F.

Optional Features

• Corrosion resistant model (non-hold open only).  Specify 7500SS

• Metal cover. Specify M suffix

• Lead lined metal cover. Specify MLL suffix

• Enhanced backcheck. Specify EBC suffix

• Delayed action with pressure relief valve

Compliance Standards

Series 7500 Door closers are designed to comply with requirements of the Americans With Disabilities Act (A.D.A.) And ANSI/BHMA Standard A117.1.

ANSI/BHMA A156.4, Grade 1 certified

UL listed

UL10C compliant for positive pressure

New York City, MEA 41-60-SM• Retrofit plates

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

7500M Norton Door Closer Metal Cover Tri-Pak Regular Arm

  • Brand: Norton
  • Product Code: 7500M
  • $451.26


Available Options