Series 7500 Multi-Sized Door Closer

Adjustable through the entire power range of door closer sizes 1 through 6, as outlined in ANSI/BHMA standard A156.4. The series 7500 also conforms to the minimum opening force requirements of the Americans with Disabilities Act (A.D.A.) and ANSI/BHMA standard A117.1 for interior doors.

Specify door width for all UNI closers.  33” to 41” and 42” to 48” available from stock.  Includes sex nuts.

Aluminum Alloy Housing

Closer bodies are constructed of a special aluminum alloy, carefully selected to accommodate interactive steel components and operating conditions.

Rack & Pinion Operation

Provides a smooth constant control of the door through its full opening and closing cycle. 180° door swing can be achieved when door, frame, hardware and arm function do not interfere.

Non-handed

With few exceptions all series 7500 and 7700 door closers are non-handed and can be installed on either right or left hand swing doors. Pinion shaft extends vertically through the closer body in both directions. Some options, as noted on pages 6-8, will require that the hand of the closer be specified.

Sweep Speed Control Valve

Allows adjustment of door speed from the door's full open position down to approximately 10° from the closed position.

Latch Speed Control Value

Allows adjustment of door speed from approximately 10° down to the door’s fully closed position.

Tri-Style® Packing

7500 comes with screws, brackets and soffit plates to allow for regular, top jamb, and parallel arm installations.

Adjustable Backcheck Cushion Valve

Provides control of the door in the opening cycle, beginning at approximately 75° of door opening. It slows/cushions the door opening, when the door is forcibly opened beyond its pre-adjusted limits.

Adjustable Backcheck Position Valve

Allows the door opening position, where backcheck cushioning begins, to be adjusted to a greater door angle, up to a maximum of 20° farther (approximately 95°).

Standard Molded Cover

Molded of high-impact U.L. listed material and covers the entire closer body assembly.  This cover is non-handed for all applications.

Warranty

These closers carry a limited ten-year warranty against defect, and life of the building on the aluminum housing.

Spring Force Indicator

This visual indicator enables the installer to quickly set and verify the spring size on the closer, eliminating the guesswork of setting the spring force.  Standard on all 7500 Series door closers.

Closer Fluid

NorGlide® closer fluid is a specially formulated multi-viscosity hydraulic fluid that contains lubricity and anti-oxidation agents that provide optimum performance and efficiency. This fluid complements the interaction of the door closer's aluminum housing with its steel and brass components, while maintaining stable viscosity to allow the door closer to perform in temperatures ranging from extremely high to as low as -40° F.

Optional Features

• Corrosion resistant model (non-hold open only).  Specify 7500SS

• Metal cover. Specify M suffix

• Lead lined metal cover. Specify MLL suffix

• Enhanced backcheck. Specify EBC suffix

• Delayed action with pressure relief valve

Compliance Standards

• ANSI/BHMA A156.4, Grade 1 certified

• UL listed

• UL10C compliant for positive pressure

• ADA Compliant (7500)

• New York City, MEA 41-60-SM• Retrofit plates