The 8875 mortise lock is equipped with a 3/4" (19mm) anti-friction latch bolt which is field reversible without removing the lock from the door.
It has a non-handed auxiliary bolt for deadlockiing and a faceplate with an adjustable bevel.
Field selection of functions are furnished standard.
TP, K or L function may be field selected by removing a set screw.
Electric locking or unlocking options are available

All 88 series exit devices are UL listed from Accident Hazard and Fire Exit Hardware, and are tested in accordance to ANSI A156.3, 1994, Grade 1.

Dimensions:
Crossbar height to finished floor: 36 13/16" (935mm) at center
Latch bolt height to finished floor:      40 3/32" (1018mm) at center
Crossbar projection: neutral - 4 7/8" (124mm), depressed - 4" (102mm)
Crossbar length: 42" (1067mm) field sizeable
Lock stile case: 8 1/4" x 2" x 15/16" (210mm x 51mm x 24mm)
Hinge stile case: 6" x 1 3/4" x 15/16" (152mm x 44mm x 24mm)
Crossbar tubing: 1" (25mm)
Lock case: 4 5/8" x 5 3/4" x 1 3/16" (117mm x 146mm x 46mm)
Face plate: 1 1/4" x 8" x 7/32" (32mm x 203mm x 6mm)
Cylinder backset: 2 3/4" (70mm)Dimensions:

Accessories

Strike and Fasteners

Device is furnished with standard 575 strike in dull black. All necessary mounting fasteners are included. Optional strikes and finishes must be specified. For strike applications, dimensions and minimum door stile information, refer to pages 14-15 in the catalog.

Cylinders are not furnished with device or trim and must be specified when ordering. Mortise lock exit devices and series 370 controls use mortise type cylinders.

Mortise - 3215 (Schlage B502-191 cam)

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating     Bad           Good

Captcha

Please complete the captcha validation below

Continue