The 8875 mortise lock is equipped with a 3/4" (19mm) anti-friction latch bolt which is field reversible without removing the lock from the door. It has a non-handed auxiliary bolt for deadlockiing and a faceplate with an adjustable bevel. Field selection of functions are furnished standard. TP, K or L function may be field selected by removing a set screw. Electric locking or unlocking options are available.All 88 series exit devices are UL listed from Accident Hazard and Fire Exit Hardware, and are tested in accordance to ANSI A156.3, 1994, Grade 1.

Specify handing.

Strike and Fasteners

Device is furnished with standard 575 strike in dull black.
All necessary mounting fasteners are included.
Optional strikes and finishes must be specified.

Cylinders:

Cylinders are not furnished with device or trim and must be specified when ordering. Mortise lock exit devices and series 370 controls use mortise type cylinders.

Mortise - 3215 (Schlage B502-191 cam)

Dimensions:
Crossbar height to finished floor: 36 13/16" (935mm) at center
Latch bolt height to finished floor: 40 3/32" (1018mm) at center
Crossbar projection:

neutral: 4 7”/8 (124mm)

depressed: 4" (102mm)
Crossbar length 42"(1067mm) field sizeable
Lock stile case: 8 1/4" x 2 3/4" x 15/16" (210mm x 70mm x 24mm)
Hinge stile case: 6" x 1 3/4" x 15/16" (152mm x 44mm x 24mm)
Crossbar tubing: 1" (25mm)
Lock case:  4 5/8" x 5 3/4" x 1 3/16" (117mm x 146mm x 46mm)
Face plate: 1 1/4" x 8" x 7/32" (32mm x 203mm x 6mm)
Cylinder backset: 2 3/4" (70mm)