The flat mounting of the option boards also provides for easier access to the terminal blocks for connection of electrified devices (such as electrified panic devices, strikes, card readers, etc).

Common to the line of PS900 Series power supplies is a constant output rating at both 12v and 24v settings, universal 120 VAC to 240 VAC input, and polarized option board connectors.

New fire alarm interface board mounting allows outputs to be configured as switched (power cut) or unswitched (power continues) when signal provided.

- All PS900 Series of power supplies and option boards have been tested and certified to meet UL294.

- Battery backup kit includes two 7A/hr batteries and provides up to four hours of backup power when cycled every 5 minutes at full load.

Features:

4A @ 12/24 VDC output, field selectable with jumper

Designed with high in rush current for powering electrified panic devices

Universal 120 -240 VAC input

Low voltage DC, regulated and filtered

Electronic power limiting foldback circuit for AC current overload protection

Two polarized connectors for distribution boards

Fused primary input

AC status monitor - isolated SPDT contacts

AC input and DC output LED status indicators

Cover mounted AC input indication

Hinged cover w/ lock down screws

High voltage protective cover

Options:

Fire Alarm Relay (FA)
– Must be installed on distribution boards

Battery Backup

2 relay EL panic device control board

2 relay QEL panic device control board

4 relay distribution board

4 relay distribution board with logic
– Field configurable for:

Time delay function

Auto operator

Security interlock

8 fused output distribution board

8 PTC output distribution board