• FBB179 4.5 x 4.5 Stanley Full Mortise -Ball Bearing Hinge

*Actual product and finish may vary

Stanley FBB179 4.5 x 4.5 Full Mortise Standard Weight Ball Bearing 4-1/2” x 4-1/2” 5 Knuckle Hinge.

See "Similar Products" Tab below for cost effective options. 

FBB179 – (ANSI A8112) Steel – polished and plated or phosphated and prime coated for painting

• For medium weight doors of average frequency

• All hinges have template screw hole location for use on either wood or hollow metal doors and frames

• Equipped with two Stanley permanently lubricated non-detachable ball bearings

• Pins in non-ferrous hinges are stainless steel

• Hole in bottom tip for easy pin removal

• Reversible flush tips and pins

• Hinges can be furnished as follows:

with raised barrel (RB)

with electric wires and/or switches (CE and/or CS)

with hospital tips (HT)

with decorative tips

with security studs

with non-removable pins (NRP)

Size Open:

4-1/2” x 4-1/2” (114 x 114 mm)

Gauge of Metal:

.134 inches (3.4 mm)

Flat Head Screws/Per Piece: 

Machine 8 - 12-24 X 1/2 

Wood 8 -12 X 1-1/4

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

FBB179 4.5 x 4.5 Stanley Full Mortise -Ball Bearing Hinge

  • Brand: Stanley
  • Product Code: FBB179-4-1/2x4-1/2
  • $11.45


Available Options



BB-31 Cal-Royal Full Mortise 4 1/2" X 4 1/2"  Ball Bearing Hinge, Std. Wt.

BB-31 Cal-Royal Full Mortise 4 1/2" X 4 1/2" Ball Bearing Hinge, Std. Wt.

BB-31 Cal-Royal Full Mortise 4 1/2" X 4 1/2" Standard Weight, 2 Ball Bearing Hinge, ANSI Templated S..

$4.83

TABB31 Cal-Royal Full Mortise Hinge 2 Ball Bearing 4 1/2" X 4 1/2"

TABB31 Cal-Royal Full Mortise Hinge 2 Ball Bearing 4 1/2" X 4 1/2"

TABB31 Cal-Royal Full Mortise Hinge 2 Ball Bearing 4 1/2" X 4 1/2" Standard Weight Meets The Buy..

$10.11

BB81 4545 PBB, Inc. Five Knuckle, Standard, Mortise Hinge

BB81 4545 PBB, Inc. Five Knuckle, Standard, Mortise Hinge

PBB BB81 4.5 x 4.5 Five Knuckle, Standard Weight, Full Mortise ball bearing Hinge4 1/2” x 4 1/2” BB8..

$5.25