Standard top pivot included.

Exterior or Interior Doors

Weight to 600 lbs.*

Door Width up to 4'0" (1219mm)

Handed

Product Description & Features

• Standard top pivot 180 included

• M19 intermediate pivot required (order separately)

• Bottom pivot mounts directly to floor

• Uses same arm and cap as 27 floor closer

• Available for fire door assemblies up to three hours (ferrous material) – specify F147.  Intermediate pivot required by UL. Specify FM19 (order separately), see page 136

• For 20-minute label suffix “–20” to the part number

• Non-ferrous base material

• Doors 60" (1524mm) to 90" (2286mm) in height should use one intermediate pivot.  Each additional 30" (762mm) of door height warrants another intermediate pivot

• 3/4" (19mm) offset (measured from centerline of pivot to face of door)

• Available for 1-1/2" (38mm) offset (door weight 350lbs.) for doors with cladding or frame molding

• Door edges must be beveled 1/8" in 2"

• Furnished with wood and machine screws

• Extended spindles available in 1/2" (13mm) increments up to 2" (51mm) longer than standard

• Doors will swing 180°, trim permitting

Handing - All offset pivots and pivot sets are handed.  Suffix RH or LH.

Door Thickness – Suffix 1-3/4", 2", 2-1/4", 2-1/2" or 3" - When ordering L series pivot for lead-lined doors, the thickness of the door must be given. The purpose of the L product is to have screws spaced so they straddle the lead in the center of the door. Also used when lead lining is under the skins of the door.  Recommended for use on extra heavy or high traffic doors.

Certifications - All Rixson® pivots and pivot sets are in compliance with ANSI/BHMA 156.4 Standards. See individual products for sub sections.

Limited Warranty - Rixson Pivot sets are warranted for 2 years for defect. See Rixson Price Book for specific details of the limited warranty.